The 10 Scariest Things About Patio Screen Door Repair
From Shiapedia
Patio Screen Door Repair - How to Do it Yourself
A damaged or worn-out screen door for your patio door glass repair is not only unsightly, but it also serves as an entrance for pests such as mosquitoes and insects like flies. Although there are services that will repair your patio doors repairs screen door, it's quite simple to complete the job yourself.
Lay the screen flat on a work surface. Remove the handle from that side by taking out the screws that hold it in place.
Damaged Screens
It's not too surprising that your door or window screens will eventually develop holes and tears due to weather pets, children, and even pets. The damaged screens aren't only ugly, but also allow pests and flies in your home. Repairing these issues is fairly easy. While patch kits and screen repair tapes offer an easy solution for minor damage, they do not work for larger problems. This step-bystep guide will show you how to repair and replace your windows and doors for screen.
The first thing you need to do is evaluate the damage. Are there ways to salvage the frame, or does it require replacement? It is important to consider this since windows and door screen frames are more likely to be damaged than mesh. A bent frame can cause the screen to become out of alignment and create holes or weak spots.
Once you've determined whether the frame is salvageable or not, you can start fixing the mesh. For this task you'll require a few essential tools. A spline roller that presses the spline into the frame, a utility knife and scissors are all required for this process. Utilizing these tools will ensure accuracy and durability in your repairs.
If you've got a large hole in your screen, start by removing as much possible of the old material to make a clean space. Then, cut a patch of the new screen material in a way that it is at least a half inch larger than the damaged area. Match the patch to the grid pattern of your window if it has one. Trim the edges to eliminate any irregularities. Fold over the spline's ends to conceal them.
Take into consideration the climate of your area when buying a replacement screen. Aluminum screens are strong and resistant to snags, while fiberglass mesh is a favorite for its affordability and flexibility. If your area is ravaged by mosquitos and other pests you might prefer a specially-designed mesh for insect screens. Whatever type of mesh you pick, be sure you stretch it tightly across the frame to avoid sagging or wrinkles.
Broken Rollers
A broken roller on your patio door locks repair screen door could be a major trouble. Not only does it make the process of sliding your door more difficult, but it can also allow bugs and other unwanted visitors to enter your home. The good news is, repair of your rollers isn't as expensive or difficult as replacing your door.
Begin by looking at your rollers to determine the issue. It may be that the wheel has sunk out, or maybe one side of the wheel has worn out by constant contact with the track. You can try to take off the wheels by inserting an screwdriver between the roller and the bracket. If you are still unable to remove the roller then spray the shaft with WD-40 and try again.
It is also important to examine the tracks from top to bottom. You can straighten bent tracks by hammering a block of wooden against the bent part. It is important to clean the tracks, as well, as they can trap sand and grit.
Once you've identified what kind of roller that's broken you can buy a replacement. Bring your old rollers to the hardware store so you can be sure you're buying the correct model. Some doors have more than one roller, so be sure to purchase enough rollers to replace them all.
Before installing the new roller make use of a screwdriver to loosen the bolts or screws that adjust the door. on the inside of the door frame near the rollers. Once the screws are loose, you can take the rollers from the bottom of the door. This is best performed by a person else so that you don't need to use your hands.
After the new roller has been installed, the door can be lowered back to its original position and the bolts or screws that adjust can be tightened. Examine the alignment of the track and the rollers. If everything is in order, your patio glass repair screen door should be able to slide effortlessly into place.
Frame Damaged
If your screen door is getting caught against the frame, there are a variety of solutions to fix it. Make sure the hinges are tight. Doors can become sluggish if the hinges are loose. If they're loose then tighten the hinge screws. If this isn't working, you might require sanding the top of the frame to make it smooth.
A frayed frame is another common issue with screens. It is costly to fix as the frame will need to be replaced. To avoid this, keep a eye out for signs of rot, and treat them as soon as you notice them. Find signs of decay by observing wood that appears darker than the rest of the frame. Be on the lookout for any areas where the wood is starting to warp or bow. If you spot any of these issues you should contact an expert.
A mesh patch kit can be used to fix damaged frames. The kits range from $2 to $7. The kit comes with a small piece mesh and glue that you can use to repair any holes in the screen. If the damage is minimal, you can also attempt to repair it using a wood filler. To do this apply the filler to the damaged area, wait for it to dry, then sand it to a smooth finish.
You can buy a framelift which is a metallic structure that is bolted on to the frame you already have that lifts it up. This is a very expensive option, but can be the best if your frame has been severely damaged or rotted.
You can make a simple leg for your screen door by using wood scraps or an old display stand for a photo frame. Attach brackets or wires to the back to place the frame on the wall. You can even attach a piece of felt to the frame's bottom to shield your wall from scratches.
Broken Splines
A damaged screen spline for your screen is the same as damaged frames or doors. It might seem like an issue that is minor enough to be overlooked however, ignoring it long enough can allow pests such as flies and mosquitoes to slip through. This could soon become a bigger problem and could result in more expensive repairs or even a new screen door.
It is simple to repair a damaged spline, especially with the right tools. Before you can get started you'll need to take out the old spline off the screen door frame. This can be done by laying the screen door frame flat on a surface such as a table or the ground. Utilize a screwdriver to pull through the free spline, and then pull it out. If the spline is especially worn or brittle, it may break as you attempt to remove it from the groove.
While you are pulling out the old spline make sure that you take off any caulking used to hold the spline in place. This will help ensure that the new spline is properly fitted into the grooves.
Once you have removed all of the old spline, you can use a utility knife to trim any excess screen off around the frame. This will ensure you have an even, clean fit on all sides of the frame when you install the new spline.
After you have a clear frame and have the new screen material cut to size, it is time to start installing the new spline. Start by putting it on one of the short sides of the frame. Place the spline on top, and then begin rolling it using your splining tool to work it into the screen channel. Continue rolling the spline, and pushing it into the screen channel as you move. Repeat this process for all of the shorter sides of the frame. While you are working make sure to keep the screen taut with spring clamps or tape.
Repeat the process for the second side once you've completed the splining of all short sides. Then, you can finish by splining both the bottom and top edges of the frame.
