What Experts In The Field Want You To Learn
From Shiapedia
How to Replace the Replacement Key Battery For the saab spare key 9-3
Saab owners must follow a set of steps that are unique to add an additional ignition key. This requires the use of a handheld computer, known as Tech-2, to be used by the dealer. A new key and transponder are required to be purchased and then programmed into the car.
It is an excellent idea to rotate your keys in order that one doesn't get worn out more quickly than the other. This will also ensure that your keys remain in top condition.
Replacement Case
The new key fobs are not like the old Saab keys. They feature electronic components that make them difficult to copy. This has made car theft considerably more difficult than it was a few years ago. However, it also has made replacing lost keys a comparatively costly endeavor.
Saab 9-3 owners should have two working keys. If one gets lost, it costs a lot to replace it in the car, as it requires replacing the CIM module and re-programming the locking cylinders. Dealers will typically charge $100-$200 for this.
There are ways to reduce these expensive. Some parts providers will use the code of a spare key to cut a new metal blade for a fraction of what the dealer charges. The key must be exactly the same as the original for it to work in your vehicle.
You can also change the case yourself by following these steps. You'll require a flathead screwdriver and some patience. With the screwdriver, pry apart the plastic, and then take off the emergency key. Once you have the case open, remove the electronic components and put them back into your new case. Place the key with the correct badge into the case.
Replacement Battery
The saab fob key replacement 9-3 replacement battery is a budget part that can be quickly and easily replaced. This YouTube tutorial for DIY Cyclone Cyd will show you how to replace the remote key fob battery in only four steps. This tutorial can be used for any modern saab key fob, however the procedure might differ slightly.
The button is normally located just below the Saab logo on the back of the fob. The button is usually found on the back of your fob just below the Saab Logo. Then use an screwdriver with a flat head to insert into the small hole in this button. This should be enough to allow you to open the fob case in order to change the battery.
After you have installed the batteries CR1632, it is possible to reassemble your remote key fob. You can then program it into your car. The entire process should not take more than one hour. This is a straightforward process that doesn't require any special tools.
If you lose your key, the procedure will be somewhat more complex, but it can still be completed. The dealer will first need to read the VIN of the vehicle before requesting a replacement TWICE module and key blade that is matched to the unique code. After that, they'll have to cut the replacement key and then program it using a new software tool called MDI.
Replacement Key Fob
The key fob is the piece that locks and unlocks your car. It has batteries inside. The batteries last for a period of, and they will eventually fail. This is a regular issue that occurs with all vehicles and the good news is that you can replace the batteries on most key fobs without having to replace the whole case. You can purchase replacement fobs from Amazon that include all the electronics already installed, which means you can just pop open the case and replace those batteries that are old. It is necessary to remove the emergency key before you replace the batteries. To do this, insert the screwdriver of a small flat head into the slot that is in the middle of the. Move the screwdriver around the case, and it will split open, making it much easier to take it out.
If you are about to replace the keys, make sure you have a spare, since this will cut down the total cost by a significant amount. If you have an additional key, you can request the dealer to cut it and program it for your car. This is much less expensive than purchasing a new key fob.
It is possible to add another key to your vehicle if you don't already have one, but it takes some research and effort. A second key can cost around a hundred dollars and it requires programming of the car's computer. This can be accomplished by a professional, but it is an expensive option for most owners.
Replacement Ignition
Unlike earlier Saab vehicles, the latest saab 93 key fob replacement 9-3 models are equipped with an advanced alarm system that is built on a key code. This means that when you lose your sole functioning key, getting an additional one could be extremely expensive since the car has to have a unique computer module added and it must also be specifically designed to accept a different key. Dealers can even charge hundreds of dollars to program a new key in the event that they are unable to do it.
If you've lost your only working key, a dealer will repair the computer in your car (known as the CIM or SAAB TWICE) to make an exchange, and they will charge you a premium price for it. We can reprogram the existing EEPROM in your car computer to be ready for an extra key. This will save you more than 50% on the cost you have to pay an auto dealer.
If you've been an owner of a 03-11 SAAB 9-3, you probably know that the ignition key isn't the most durable. If your ignition key is not working properly, you should look into replacing it. They can become very sticky and the buttons can fall off. It's not as difficult as it seems to replace the ignition key. With the proper tools, it can be accomplished quickly.
