The Little-Known Benefits Of Ghost Immobiliser Problems
From Shiapedia
Protect Your Pride And Joy With The Ghost Immobiliser
Protect your pride & joy against theft by using the ghost immobiliser problems Immobiliser. It's discreet and does not require any additional key fobs.
The device uses existing buttons on your vehicle (steering wheel, door panels & centre console) to create a unique, changeable pin code sequence of up to 20 presses long. This allows your vehicle to start.
Simple change of PIN code
Many homeowners are upgrading their security because of the rising number of vehicle thefts. There are a myriad of aftermarket security devices available, from tracking systems to immobilisers and alarms. However, not all of these are equally effective in protecting your car. A tracking system can aid in finding your vehicle if it's stolen however, it won't stop the crime. An immobiliser, on the contrary is exactly what says on the tin: it shuts down the engine of your vehicle to prevent it from being started. The autowatch ghost installers Ghost is one of the most advanced options available, making it nearly impossible for thieves steal your car.
The ghost device utilizes the buttons on your car to generate an unique sequence that needs to be entered in order for the engine to start. This can be done by using the window, heater or indicator stalk buttons. There is also a mobile application that can be used as an emergency PIN override, which allows the driver to operate their vehicle without the need to use the button sequence. This is a great option for those who want to offer your car to valet parking or servicing. The immobiliser remains active.
The Ghost is a truly unique and ingenious device that is used in conjunction with the buttons in your vehicle rather than as a separate device. It is not only an effective deterrent to vehicle theft and vandalism, but it can also be used on any future vehicles you may own. This makes it a better investment than a conventional wheel lock.
Weatherproof tiny device
The autowatch ghost installers nottingham range rover vogue ghost installer Immobiliser is an advanced security device that shields your pride & joy from key hacking and cloning. It also prevents ECU swapping. It is a weatherproof tiny device that connects directly to your vehicle's ECU over the CAN data bus to shut down the engine. It can be installed in the vehicle without additional wiring, and has been thoroughly tested to ensure compatibility with all vehicles. It is also immune to jamming devices which are a typical technique that car thieves use to bypass immobilisers.
The benefit of CAN data over traditional systems is that they operate silently. It isn't detected by sophisticated RF scanning or code-grabbing technologies and is also unrecognizable by traditional diagnostic tools. The Autowatch Ghost does not employ LED indicators but instead utilizes buttons in your vehicle, like the steering wheel, centre console or doors, to create an unique sequence of disarming. The sequence can be extended to 20 or more presses to provide additional security. The iPhone app only allows one connection, and comes with a unique pairing code for the Ghost. All communication between the two devices is encrypted.
The Ghost prevents car thieves adding an ignition key replacement or replacing the ECU to bypass the immobiliser. It will only allow the engine to start only if the correct pin code is entered. It is also possible to put it into valet/service mode for a temporary operation (with defined parameters like a 30mph speed limit) so that you can give your car to a valet service to be serviced without needing to enter a PIN code.
Tested for each vehicle
The Autowatch Ghost is the first aftermarket CANbus immobiliser. It can be connected to the vehicle's wiring and to the engine control unit (ECU). The device intercepts electronic signals to disable your car's system from going through its normal startup routine until you input a custom passcode. The system can be turned on and off through your smartphone's application without the need for wires.
Standard factory immobilisers for vehicles work by having an electronic transponder in the key, which sends an electronic signal to the ECU. The car will begin to start if the correct code is sent. However, if a transponder from a different vehicle is used instead, the immobiliser doesn't recognize it. This allows the vehicle be started and stolen. The Ghost immobiliser was developed by an South African company at the top of security systems for vehicles technology. It shields you from hacking or key cloning and even key theft. The only way a thief could take your car is by physically towing it away and even then, they wouldn't be allowed to drive it.
Ghost uses buttons on your vehicle, like the indicator stalk, steering wheel, and the doors, to generate unique PIN codes that must be entered to use your vehicle. This is done without any additional hardware, like keys fobs. It can take up 20 to 20 presses. It is also undetectable to diagnostic equipment and doesn't transmit radio frequency signals, so thieves are unable to utilize sophisticated RF scanning or code grabbing techniques to detect that a security system has been installed.
Ghost is more difficult to get rid of than car alarms that require disarming using the buttons. This makes it an excellent addition to a GPS tracking device, which can be used to track your vehicle after it's been taken.
Emergency PIN code override
You don't need to go far on social media to see stories or even videos of vehicles that were stolen by thieves using the latest technology tools available to them. This includes key-cloning and hacking devices that allow you to start your car without the original keys.
Our Ghost immobiliser combats this issue and offers an additional layer of protection to stop your vehicle from being taken in the event of being targeted by thieves. It creates an unique pin code push sequence from your buttons on the steering wheel, door panel and the centre console. This unique PIN is entered in conjunction with your original key fob to stop the engine from starting. The unique PIN for override is on the black card that you will receive following installation. It is simple to remember since there are no LED indications.
The device is hidden inside the vehicle's wires and does not emit radio signals, therefore it can't be detected by modern thieves with diagnostic software that can detect the type of security system you have installed. This makes it an excellent alternative to a tracker.
Unlike other security systems, that rely on a relay located in the engine bay, these immobilisers CANBUS communicate through CAN databus (brand dependent) with the ECU and BCM of the vehicle. This allows them to disable the vehicle completely through a digital block of commands to both the ECU and the engine.
They can also be linked to a separate analogue alarm immobiliser or tracker. This must be specified prior to the installation. They are also fully service/valet mode compatible and a good alternative to a tracker when you have your car checked for repair at the dealer.
Service/Valet Mode
In recent years there has seen an increase in the number of cars being stolen with the owners' keys. It is more easy than ever to steal your pride and joy thanks to the availability of key cloning devices and door lock picks. We've developed the Autowatch Ghost Alarm Installation Immobiliser to combat this. It stops your car from being driven, even if your keys have been cloned.
It directly communicates with your car's ECU (Engine Control Unit) via the CAN data loop. It's completely silent as it doesn't use radio frequencies or keys fobs. It isn't detected by diagnostics or any other hacking device. It also prevents you from adding an ECU or key to bypass the system because only the PIN number allows the engine to be started.
The device is hidden inside your vehicle and is accessed by existing buttons on your steering wheel, centre console, and door panels. Before you can start your vehicle, you must enter a unique, changeable PIN code up to 20 numbers.
This is the first aftermarket CAN-bus immobiliser that was created. It will prevent your vehicle from being driven or started when you don't enter a PIN code before entering. If the device is armed and you try to drive away, it will display an indication on your dash, which will flash on a regular basis for approximately 300m, if you enter your PIN code at this point it will disarm the anti-hijack and your car will continue to drive just as normal. If you don't enter your PIN at this point the indicator will continue to flash and will require a new pin code each time you attempt to start your vehicle.
