5 Common Mistakes To Avoid When Installing Custom Curtain Rods
From Shiapedia
Putting in customized curtain rods can elevate the look of any room, adding a contact of style and personalization. Nevertheless, it’s not so simple as just drilling a number of holes and hanging up your curtains. Small mistakes can lead to crooked rods, curtains that don’t dangle properly, and even damage to your walls. To save yourself from frustration and extra work, listed here are 5 common mistakes to keep away from when putting in custom curtain rods.
1. Neglecting to Measure Properly
One of many biggest mistakes folks make is skipping the measurement step or doing it incorrectly. Curtain rods must be placed at a exact height and width to make sure the curtains look balanced and functional.
- Why It’s a Problem: For those who don’t measure accurately, your curtains could end up being too brief, too long, or not wide enough to cover the window.
- The right way to Avoid It: Use a tape measure to determine the height the place you need your rod to sit. Typically, rods must be put in 4-6 inches above the window frame for a taller room appearance. Also, extend the rod 3-6 inches beyond the window frame on either side to permit for full curtain coverage and smooth opening.
2. Selecting the Flawed Hardware
Not all curtain rods and brackets are created equal. Selecting the wrong hardware can lead to instability or issue in hanging your curtains.
- Why It’s a Problem: Heavy curtains on flimsy rods can cause the rod to sag and even collapse. Similarly, utilizing the improper type of screws or wall anchors can result in rods pulling out of the wall over time.
- Methods to Avoid It: Check the load of your curtains and select rods that can support them. For heavy drapes, opt for sturdy rods with reinforced brackets. In case you’re putting in into drywall, use appropriate anchors to ensure a secure hold.
3. Ignoring Wall Material
Not all partitions are the identical, and the type of wall you’re working with determines the installation approach and tools required.
- Why It’s a Problem: Failing to consider wall material can lead to unstable installations. For example, nails or screws inserted directly into drywall without anchors will likely loosen over time.
- The way to Keep away from It: Establish whether or not your wall is drywall, plaster, concrete, or wood. For drywall, always use anchors. For concrete partitions, you’ll want a masonry drill bit and anchors. Tailoring your approach to the wall materials ensures a secure and long-lasting installation.
4. Hanging the Rod Too Low
It’s tempting to install curtain Iron Rods just above the window frame, however this mistake can make your room look smaller and the window appear shorter.
- Why It’s a Problem: Curtains that are hung too low can visually reduce off the height of your room, making it really feel cramped and less inviting.
- The right way to Keep away from It: Always aim to hold the curtain rod higher than the window frame—typically four-6 inches above, or even closer to the ceiling for a dramatic effect. This trick draws the eye upward and makes your ceilings seem taller.
5. Forgetting to Level the Rod
A crooked curtain rod can smash the overall aesthetic of your room, irrespective of how beautiful the curtains are.
- Why It’s a Problem: Uneven rods make curtains hang awkwardly, which is discoverable and unattractive.
- How you can Avoid It: Always use a level earlier than drilling or attaching brackets. Mark your measurements on the wall with a pencil and double-check for accuracy. Even a slight tilt might be noticeable, so take your time to ensure perfection.
Bonus Tips for a Flawless Curtain Rod Set up:
- Pre-Check Your Curtains: Before putting in the rod, make sure the curtain length and style match your deliberate rod height and width.
- Use a Template: If putting in a number of rods, create a template to ensure uniform placement throughout the house.
- Consider Aesthetic: Match the rod style and finish to your room’s decor for a cohesive look.
Installing custom curtain rods doesn’t should be a hassle. By avoiding these widespread mistakes and following the information above, you can achieve a cultured, professional-looking outcome that enhances your space. A little extra time spent on preparation and attention to element will save you from headaches down the road and provides your home windows the right frame they deserve.
