9 Lessons Your Parents Taught You About Patio Door Lock Repair
From Shiapedia
Patio Door Lock Repairs
Over time, patio door wear and tear can cause lock malfunctions. There are a few simple steps you can follow to restore the security of your uPVC door.
These simple fixes will ensure your home is secure regardless of whether you re-align the lock or clean the mechanism.
Clean the Lock
While patio doors are an excellent way to let in the outside and keep the elements out however, they can also pose a security risk if your lock isn't working as it should. With time, wear and tear, hot and cold weather, dirt, and debris can cause your patio door lock to become difficult to operate. With a little effort, you can make sure that the lock on your patio glass door repair near me door always works properly.
It's essential to clean the lock on your patio door and all of its moving parts. This will help get rid of any grime or coatings that could be preventing your lock from working correctly. Begin by wiping the moving parts of your patio glass repair near me door's lock with a damp cloth, then employ a scouring pad or rough damp cloth to scrub the hard-to-reach areas of the door or frame that are coated with dirt. Then, wipe the lock down with a dry cloth to get rid of any moisture. Allow it to air-dry before using it.
If your patio door is equipped with pin-tumbler latches you can apply powdered Graphite on the key. You can also apply a Teflon lubricant like WD-40 Multi Use Product. This kind of lubricant is easy to apply and doesn't break down with time. If you're unable to locate an appropriate lubricant You could try using a pencil with an extremely sharp tip. Put the pencil in the lock, and shake it around to spread the graphite.
Regular maintenance is also required to keep the tracks of sliding patio doors free from dirt, dust and debris. These tracks can be especially susceptible to ice and snow, which can cause them to be stuck or jammed and make it difficult for your patio doors to open and close.
You can clean the track rails and rollers of sliding patio doors by removing damaged or dirty weather stripping. Clean it and replace it. The same can be done for rollers on patio door repairs near me doors, which can be wiped down and then sprayed with a non-stick lubricant that will allow them to move freely.
Lubricate the moving parts
uPVC French Doors, similar to sliding glass patio doors repair patios, are operated using 3 to 4, or sometimes 5 points locking mechanisms. These include the handle and lock cylinder that is operated with a key. They require maintenance and the lubrication of moving parts. This can be done using an oil that is thin, but never WD40. It should be done at least once a year.
If hinges that are sagging aren't the cause, the door may be misaligned and catching or rubbing against the strike plate hole within the frame. Remove the strike plate, and use a sharp tool to increase the size of its mortise. This lets the latch sit correctly in the hole and prevents getting caught or rubbing against the frame.
Measure the width of the cylinder with the help of a piece of book or wood that can be inserted into the gap above the adjustment screw. The outer dimension is the distance from the outside of the door to the center of the cylinder, and the inner dimension extends from the center of the adjustment screw until the end of the cylinder.
Verify the lock's width
If your patio door latch isn't able to turn, even after oiling and cleaning it's possible that it's not aligned with the strike plate. Check to see if the door is balanced and whether the hinge screws are secure, but in many cases, moving the strike plate upwards or downwards can fix the issue.
The most common issue is when the strike of the lock is too small for the latch to engage. In this case, enlarge the opening with an hammer and chisel. Then test the latch so that it doesn't touch the jamb frame of the door or fall on it.
Before purchasing a new lock, first determine what kind of mortise lock you currently have. You can do this by taking a look at the faceplate of the lock and noting if it is square or round. Look at each screw hole in the existing lock and note their dimensions. This will assist you in finding a replacement that is the same size and fits perfectly into your existing hole.
In addition to identifying the mortise lock that is currently in use, you'll also need to check it for any scratches or bends that may require repairing. A damaged or bent latch is more likely than one that has frequently used to break. Replace the lock if you notice signs of damage.
Once you've decided on the kind of lock replacement you need It's time to start the actual repair. The spindle and handle must be removed from the patio door. Introduce the new handle. Start by installing the interior handle. Align it with the spindle and then secure it in place using the two screws or bolts. Once the handle's interior is in, install the handle on the outside and screw it in the position as well. Once you've completed these steps you can test the new handles to ensure they can be opened and closed easily and that the latch locks correctly when you strike the plate.
Make sure you check the Strike of the door.
The door latch and strike plate are two components of the lock that work together to ensure that the latch is secure the door. If these are misaligned and the latch doesn't latch the door shut properly. Fortunately, this issue is usually simple to fix.
Examine the holes that receive the strike plate to ensure they are clear of obstructions, such as dirt or plastic plugs. Loosen the keeper screws holding the strike plate. This allows it to move vertically but it will not be able to separate from the frame. Then, you can adjust the strike plate until its holes for receiving are aligned with the latch hooks on the door latch. Once the strike plate has been adjusted tighten all screws and check whether the door closes smoothly.
Door strike plates can be a bit difficult to access for homeowners who have sliding patio doors, however they're essential to lock and unlock your door. The plates made of metal are located between the top and bottom jambs of the door where they support its latch. Then, the door latch is able to slide into the strike plate, creating a seal when closed. If the strike plate is damaged, rusted, or not properly installed, it could prevent the latch from locking the door securely.
One common reason for a patio door lock to not close or not close is a misalignment between the latch and strike plate. This can be verified using the "lipstick" test. Rub some lipstick across the edge of the deadbolt. Then cover it with masking tape. The lipstick will leave the mark when you close the door. This will show you exactly where the latch connects to the strike plate. If the mark is too high or low you can easily alter the strike plate.
The sliding patio door locks keep your home safe from burglars, and if they're not working properly, you need to repair the issue quickly. Follow these easy steps to repair your patio door lock repair (Suggested Resource site) door lock and restore its function.
